One of the most infuriating concerns that you may encounter at home would be the occurrence of a faucet that wouldn’t close or stop running. Besides potentially incurring a huge utility bill by the end of the month, you may also have to contend with the possibility of having flooded indoor areas. Having to clean up the mess is one thing, but paying for all the water damages is a different story overall.

In that case, there are always certain things that you must keep in mind to prevent much bigger damages at home. Piping and faucet problems are quite difficult to handle, but you may just manage them without much hassle with the right knowledge and skillset.

We have listed a couple of tips and tricks below to help you handle them like a pro. Just keep in mind that not all of them may work all the time, as this would still depend on the extent of the damage to your faucet. Nonetheless, they cover some of the most basic aspects of the task, and they require the least amount of tools and effort in the process.

1. Shut off the Main Valve

To avoid wasting more water and adding more to your utility bills, you must consider shutting off your main valve at home. You do not necessarily need to close off every water source, as some houses are fitted with multiple valves. You just need to retrace the pipe connected to the damaged faucet and determine which one would stop the water from flooding your indoor areas.

They are usually identified by red handles, though this isn’t always the case. Bring a flashlight with you, just in case your valves are located in the basement, to avoid having trouble with finding them.

2. Disassemble the Sink and Cover the Drains

After shutting off the valve and cleaning out the watery mess, you must disassemble the sink and cover the drain. This will enable you to identify the extent of the damage just by inspecting the faucet itself. Sometimes, the damage may not be visible due to the continuous splashes of running water, so you shouldn’t skip this step.

Covering the drain may seem like an unnecessary part of the process, but it will at least prevent more wastewater from dripping out towards your indoor floor areas.

3. Find a Compatible Replacement for the Faucet

Not all faucets are made equal. In such a case, you must determine which one would best fit your water outlet so that you wouldn’t be spending too much time and money. The thing about faucets is that they aren’t really that hard to replace; you just have to know the appropriate measurements so that you can make the right purchase with just a single visit to the hardware store.

The other good news is that they aren’t that expensive, so as long as you are going for generic designs as a placeholder. If you want to maintain the consistency of your exterior design, however, feel free to pick out the most elegant one.

Conclusion

Having a faulty faucet at home can get quite infuriating, but at least the process involved in replacing them isn’t that much difficult. Yes, it may be time-consuming, but after applying all the needed fixes, you can very much relax knowing that you would never have to encounter another wet mess for a very long time.

Shutting off the valve, disassembling the sink, and finding a compatible replacement faucet will be more than enough to solve your running water problem at home, so long as you stick to the process and use all of the proper tools for the job.

If you are looking for emergency plumbers in Canoga Park, CA that would repair your running faucet, look no further than our experts here at Candu Plumbing & Rooter. We offer various top-quality plumbing services, including water heater repairs, trenchless pipe lining, gas line repairs, and other things. Contact us today and let us handle all your piping concerns for you.